功能梯度材料板件三维分析的半解析梯度有限元法

将半解析有限元与梯度有限元相结合,形成一种半解析梯度有限元来求解功能梯度材料板件问题。该方法兼有有限元法的适应性强、程序统一,半解析有限元法的节省单元与计算工作量,梯度有限元法的适应构件内部材料性能任意梯度分布等特点,并实现用一维数值计算给出构件三维分析结果。算例分析表明了方法的精度、功能与上述特点,充分揭示了功能梯度材料板件力学响应的三维形态。半解析梯度有限元法可推广应用到其他功能梯度材料面结构的各类分析中。     

功能梯度压电材料圆环位移和电势边值问题的精确解

圆环形的压电材料器件在智能结构中得到了广泛的应用。本文推导了横观各向同性功能梯度压电材料圆环在内、外边界上给定位移和电势情况下的一般解。极化方向在圆环的半径方向，材料常数的梯度方向也设定在半径方向，并可表示为半径r的幂，本构关系为线性。然后推导了压电圆环外壁固定、接地，内壁沿垂向有一微小位移、电势分别为余弦分布和均匀分布的问题的精确解，并计算了该问题在这两种电势情况下产生的无量纲形式的径向和环向位移、电势、应力及电位移沿径向分布的数值结果。计算中考虑了不同的材料梯度，以及内壁的位移与电势的不同比例。     

Exact solutions for radial deformations of a functionally graded isotropic and incompressible second-order elastic cylinder

We find closed-form solutions for axisymmetric plane strain deformations of a functionally graded circular cylinder comprised of an isotropic and incompressible second-order elastic material with moduli varying only in the radial direction. Cylinder's inner and outer surfaces are loaded by hydrostatic pressures. These solutions are specialized to cases where only one of the two surfaces is loaded. It is found that for a linear through-the-thickness variation of the elastic moduli, the hoop stress for the first-order solution (or in a cylinder comprised of a linear elastic material) is a constant but that for the second-order solution varies through the thickness. The radial displacement, the radial stress and the hoop stress do not depend upon the second-order elastic constant but the hydrostatic pressure and hence the axial stress depends upon it. When the two elastic moduli vary as the radius raised to the power two or four, the radial and the hoop stresses in an infinite space with a pressurized cylindrical cavity equal the pressure in the cavity. For an affine variation of the elastic moduli, the hoop stress in an internally loaded cylinder made of a linear elastic isotropic and incompressible material at the point is the same as that in a homogeneous cylinder. Here R_in and R_ou equal, respectively, the inner and the outer radius of the undeformed cylinder and R the radial coordinate of a point in the unstressed reference configuration.     

含压电层的功能梯度柱壳的自由振动分析

基于三维弹性理论，导出了带有压电层的圆柱形梯度壳的动力学方程以及相应的边界条件，用幂级数展开法得到了求解该圆柱形梯度壳自由振动的三维精确公式．通过实例模型求解了该壳体的自由振动的固有频率；分析了不同电学边界条件对壳体的振动频率的影响。结果可评估各种近似理论解和数值解的正确性。     

The Stress Response of Functionally Graded Isotropic Linearly Elastic Rotating Disks

The purpose of this research is to investigate the effects of material inhomogeneity on the response of linearly elastic isotropic solid circular disks or cylinders, rotating at constant angular velocity about a central axis. The work is motivated by the recent research activity on functionally graded materials (FGMs), i.e., materials with spatially varying properties tailored to satisfy particular engineering applications. The analog of the classic problem for a homogeneous isotropic rotating solid disk or cylinder is considered. The special case of a body with Young"s modulus depending on the radial coordinate only, and with constant Poisson"s ratio, is examined. For the case when the Young"s modulus has a power-law dependence on the radial coordinate, explicit exact solutions are obtained. It is shown that the stress response of the inhomogeneous disk (or cylinder) is significantly different from that of the homogeneous body. For example, the maximum radial and hoop stresses do not, in general, occur at the center as in the case for the homogeneous material. Furthermore, for the case where the Young"s modulus increases with radial distance from the center, it is shown that radially symmetric solutions exist provided the rate of growth of the Young"s modulus is, at most, cubic in the radial variable. It is also shown for the general inhomogeneous isotropic case how the material inhomogeneity may be tailored so that the radial and hoop stress are identical throughout the disk. This revised version was published online in August 2006 with corrections to the Cover Date.     

The transient piezothermoelastic problem of a thick functionally graded thermopiezoelectric strip due to nonuniform heat supply

This paper is concerned with the theoretical treatment of the transient piezothermoelastic problem involving a thick functionally graded thermopiezoelectric strip due to nonuniform heat supply in the width direction. The thermal, thermoelastic and piezoelectric constants of the strip are assumed to vary exponentially in the thickness direction. The transient two-dimensional temperature is analyzed by the methods of Laplace and finite sine transformations. We obtain the exact solution for a simply supported strip under the state of plane strain. Some numerical results for the temperature change, the displacement, the stress and electric potential distributions are presented in figures and table. Furthermore, the influence of the nonhomogeneity of the material and that of the electric boundary conditions are investigated.     

Filiform李代数Q_n的Hom-结构

首先证明了有限维Z-阶化李代数上的一个线性算子是Hom-结构的充分必要条件,即它的每个齐次分支也是Hom-结构.然后计算了特征零代数闭域上一类有限维Z-阶化Filiform李代数Qn的齐次Hom-结构,从而决定了Qn的所有Hom-结构.     

半格分次弱Hopf代数的$G$-Cleft扩张

本文首先将Clifford幺半群代数分解为交叉积的半格直和,然后将这个结果通过$H$-$G$-cleft扩张推广到所谓的$G$-交叉积上.     

Hochschild and cyclic (co)homology of superadditive categories

We define the Hochschild and cyclic (co)homology groups for superadditive categories and show that these (co)homology groups are graded Morita invariants. We also show that the Hochschild and cyclic homology are compatible with the tensor product of superadditive categories.     

具有不同功能梯度分布函数的板件的三维分析

发展了一种新颖的功能梯度结构分析的细观元法。细观元法对结构的常规有限单元内部设置密集细观单元以反映材料特性梯度变化,又通过协调条件将各细观元结点自由度转换为同一常规有限元自由度,再上机计算。这种细观元法既能充分反映材料功能梯度变化特性;而其计算单元又和常规有限元一样,是一种针对功能梯度结构分析的有效数值方法。文中通过细观元技术进行计算、分析,给出了具有不同功能梯度分布函数板件的力学量三维分布形态。